• Upper Computer Connection

1. Install the upper computer software on the computer and connect the original RS232C data cable.
2. Double-click to open the installed software, and then click Connect.

1. Install the upper computer software on the computer.
2. Connect the original USB cable.
3. Long press the SEND button on the meter for 2s, and “SEND” will show in the bottom left corner of the screen.
4. Double-click to open the installed software, and then click USB Connect.

1. Install the upper computer software on the computer.
2. Long press the RS232C (USB) button on the meter for 2s, and “S” will show on the screen.
3. Connect the original RS232C data cable or optional USB cable.
4. Double-click to open the installed software, and then click USB Connect.
5. UT61E can connect directly without long pressing the RS232C (USB) button.

1. Install the upper computer software on the computer.
2. Connect the USB cable.
3. Short press the USB button, and “USB” will show on the screen. If there is no response after pressing the USB button, press the MENU button and then press the USB button again.
4. Double-click to open the installed software, and then click Connect.

Install the upper computer software on the computer and connect the data cable. Export previous test results to the software (there must be data in the meter). Manually save the data during the test.

Turn on the meter and connect the USB cable. Short press the USB button, and “S” will show in the upper left corner of the screen. Click Connection on the software.

1. Press the POWER button to turn on the meter.
2. Press the MENU button, and “USB 0” will show on the screen.
3. Press the UP/DOWN button to select “USB 1”.
4. Press the ENTER button (after short pressing for 3 times).
5. Press the MENU button to connect the computer.